Specifications

740 ExtremeWare XOS 10.1 Command Reference Guide
Configuration and Image Commands
use image
use image {partition} <partition>
Description
Configures the switch to use a saved image on the next reboot.
Syntax Description
Default
Primary partition.
Usage Guidelines
To view your current (active) partition and the selected partion for the next reboot or installation, use
the following command:
show switch
Output from this command includes the selected and booted images and if they are in the primary or
the secondary partition.
There are two partitions on the switch: primary and secondary. Primary indicates the saved image in
the primary partition; secondary indicates the saved image in the secondary partition.
Example
The following command configures the switch to use the image stored in the primary partition on the
next reboot:
use image partion primary
A message similar to the following is displayed:
To take effect of partition change please reboot the switch!
partition Specifies the software image saved in either the primary or secondary
partition.