User's Manual

Installation Separately Ordered Components
2-2
3. Perform a visual inspection of the WS-AP3660 for any signs of physical damage. Contact
Enterasys Networks if there are any signs of damage. Refer to “Getting Help” on page xi for
details.
Unpacking the WS-AP3660 Power Supply
Unpack the WS-AP3660 Power Supply as follows:
1. Open the box and remove the packing material protecting the power supply.
2. Verify that the contents of the carton contains the items listed in Table 2-2.
3. Perform a visual inspection of the power supply for any signs of physical damage. Contact
Enterasys Networks if there are any signs of damage. Refer to “Getting Help” on page xi for
details.
Separately Ordered Components
The following list of accessories are available for the Enterasys Wireless Outdoor Access Point
WS-AP3660. For ordering information, contact your Enterasys sales representative.
• Antennas. The following antennas can be used with the WS-AP3660:
– WS-AO-2S10360 — Outdoor, 2.4GHz, 10 dBi, Omni Baton (FCC Domain only)
– WS-AO-DT05120 — Outdoor, 2.3 - 2.7/4.9 - 6.1GHz, Triple-feed, 5dBi, 120 deg, Sector
– WS-AO-5D16060 — Outdoor, 5.15 to 5.875GHz, Dual-polarization, 16dBi, 60 deg, Sector
– WS-AO-5D23009 — Outdoor, 5.15 to 5.875GHz, Dual-polarization, 23dBi, 9 deg, Panel
1 Waterproof cable gland adapter assembly
1 Enterasys Wireless Outdoor AP Quick Reference
Table 2-1 WS-AP3660 Supplied Components (Continued)
Quantity Item
Table 2-2 WS-AP3660 Power Supply Components
Quantity Item
1 WS-PS3660-MR power supply
1 Wall mounting bracket
1Spacer
4 M5 screws
4 M5 flat washers
4 M5 spring washers
1 Ground screw
2 Stainless steel tie back straps (pole diameters up to 4 inches)
1 DC to DC cable
1 Waterproof AC connector (power cord not supplied)
1 Enterasys Wireless Outdoor AP Power Supply Quick Reference