User's Manual

Installation WS-AP3660 Power Supply Installation Procedures
2-12
Attaching the Mounting Bracket
To attach the mounting bracket to the WS-AP3660 Power Supply:
1. Determine the desired orientation (vertical or horizontal) of the mounting bracket (see
Figure 2-9). In the horizontal position, two power supplies can be attached to one bracket.
2. Attach the mounting bracket and spacer to the power supply using four M5 screws, four
spring washers, and four flat washers (see Figure 2-10).
Figure 2-9 Mounting Bracket and Spacer Orientation
Figure 2-10 Completed Bracket Installation
Horizontal Bracket Orientation
Vertical Bracket Orientation