User's Manual

Installation WS-AP3660 Power Supply Installation Procedures
2-16
Connecting the Power Supply to AC Power
The WS-AP3660 Power Supply provides a power receptacle for connecting the unit to an external
AC power source. The power supply is shipped with a waterproof AC connector assembly (see
Figure 2-15), but a power cord is not provided. Before connecting the power supply to AC power,
the AC connector assembly must be installed onto the power cord.
Figure 2-15 WS-AP3660 Power Supply AC Connector Assembly
Install the waterproof connector assembly as follows:
1. Strip the power cord sheath.
2. Insert the clamp ring and seal into the body.
1 Sealing nut 3 Seal 5 Housing assembly
2 Clamp ring 4 Body