User's Manual
Table Of Contents
WS-AP3660 Power Supply Installation Procedures Installation
Enterasys Wireless Outdoor WS-AP3660 Installation Guide 2-17
3. Insert the sheathed cable through the sealing nut, clamp ring, seal, and body.
4. Insert the cable conductors into the housing assembly using the pin out diagram shown in
Figure 2-16.
Figure 2-16 Power Cable Pin Out Diagram
5. Secure the wires by tightening the single lock nut with a 1.5 mm (Hex) driver.
1 Pin 1 - Hot 3 Pin 3 - Neutral
2 Pin 2 - Not used 4 Pin 4 - Ground
1 Lock nut