User guide

disable sticky
ExtremeWarePx1 1.2 Command Reference Guide 161
disable sticky
disable sticky
[L4 client-ip |
L7 [all | client-ip | cookie-id | session-id]]
Description
Disables the speciÞed persistence (stickiness) mode.
Syntax Description
Default
By default, no persistence is enabled.
Usage Guidelines
You must have administrator privileges to issue this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command disables layer 4 client-IP persistence mode:
disable sticky L4 client-ip
The following command disables layer 7 session-ID persistence mode:
disable sticky L7 session-id
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
L4 Specifies layer 4.
L7 Specifies layer 7.
all Specifies all persistence modes (client-IP, cookie-ID, and session-ID).
client-ip Specifies client-IP persistence mode.
cookie-id Specifies cookie-ID persistence mode.
session-id Specifies session-ID persistence mode.