User guide

enable sticky

ExtremeWarePx1 1.2 Command Reference Guide 163

enable sticky

[L4 client-ip |

L7 [all | client-ip | cookie-id | session-id]]

Description

Enables the speciÞed persistence (stickiness) mode.

Syntax Description

Default

By default, no persistence is enabled.

Usage Guidelines

You must have administrator privileges to issue this command.

You must use the build command to commit the conÞguration changes made by this command.

Example

The following command enables layer 4 client-IP persistence mode:

enable sticky L4 client-ip

The following command enables layer 7 session-ID persistence mode:

enable sticky L7 session-id

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.

L4 Specifies layer 4.

L7 Specifies layer 7.

all Specifies all persistence modes (client-IP, cookie-ID, and session-ID).

client-ip Specifies client-IP persistence mode.

cookie-id Specifies cookie-ID persistence mode.

session-id Specifies session-ID persistence mode.