User guide

conﬁgure default-gateway

ExtremeWarePx1 1.2 Command Reference Guide 169

conﬁgure default-gateway

configure default-gateway {add} <IP address>

Description

Adds the speciÞed IP address as a default gateway.

Syntax Description

Default

N/A.

Usage Guidelines

You must have administrator privileges to issue this command.

You can have only two default gateways at a time. The Þrst default gateway you conÞgure is used by

default. If you want to use the second default gateway, issue the configure default-gateway switch

command. You can later change back to the Þrst default gateway by issuing the configure

default-gateway switch

command again.

You must use the build command to commit the conÞguration changes made by this command.

Example

This example adds a default gateway with the IP address 10.6.2.1.

SummitPx1::12 # configure default-gateway add 10.6.2.1

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.

IP address The IP address of the default gateway to be added.