User guide

conﬁgure vrrp auto-sync master

ExtremeWarePx1 1.2 Command Reference Guide 181

conﬁgure vrrp auto-sync master

configure vrrp auto-sync master partner-ip <IP address>

Description

Sets the IP address for the master switch for automatic synchronization.

Syntax Description

Default

N/A.

Usage Guidelines

You must have administrator privileges to issue this command.

You issue this command on the backup switch for automatic synchronization. This command establishes

the switch as the backup switch and identiÞes the corresponding master switch. You can specify the

system IP address of the master switch (as set by the configure system-ip command) or the

management IP address (as set by the configure mgmt ipaddress command).

You must use the build command to commit the conÞguration changes made by this command.

Example

The following command establishes the switch as the backup switch for automatic synchronization and

identiÞes the master switch as the switch with IP address 10.4.3.2.

configure vrrp auto-sync backup partner-ip 10.4.3.2

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.

IP address The IP address of the other switch.