User guide

configure server-group health-check interval
ExtremeWarePx1 1.2 Command Reference Guide 213
configure server-group health-check interval
configure server-group name <name string> health-check
interval <seconds>
Description
ConÞgures the interval property for the speciÞed server group.
Syntax Description
Default
If this command is not issued, the global default value for the interval property is used.
Usage Guidelines
You must have administrator privileges to issue this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command sets the interval property to 45 seconds for the server group named
srvgroup1.
configure server-group name "srvgroup1" health-check interval 45
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
name string The name of the server group for which to configure the property.
seconds The time interval between successful health checks for servers in the specified group.