User guide

224 ExtremeWarePx1 1.2 Command Reference Guide
Health-Check Commands
enable health-check server-group-name
enable health-check server-group-name <name string>
Description
Enables health checks for a speciÞed server group.
Syntax Description
Default
Health checks are enabled for all server groups by default.
Usage Guidelines
You must have administrator privileges to issue this command.
Health checks are performed only if the health-check facility itself is enabled. This facility is enabled by
default. It can be disabled with the disable health-check command and re-enabled with the enable
health-check
command.
You use this command to re-enable health checks for a server group after disabling them with the
disable health-check server-group-name command.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command enables health checks for the server group named svrgroup1.
enable health-check server-group-name "srvgroup1"
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
name string The name of the server group for which health checks are to be enabled.