User guide

enable server

ExtremeWarePx1 1.2 Command Reference Guide 225

enable server

[(index <index number>) |

(ipaddress <IP address> {port <port number>})]

Description

Re-enables a server that has been disabled.

Syntax Description

Default

All servers are enabled by default.

Usage Guidelines

You must have administrator privileges to issue this command.

You can identify a server to be enabled either by its index number or by its IP address and port number.

If you specify only the IP address, this command enables all disabled servers with that IP address (and

any port number).

Enabling a server brings the server back into normal use by the Px-series application switch.

You must use the build command to commit the conÞguration changes made by this command.

Example

The following command enables the server with index number 1:

enable server index 1

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.

index number The unique index number of the server to be enabled.

IP address The IP address of the server(s) to be enabled. The IP address plus the port number uniquely

identify a server.

port number The port number of the server to be enabled. The port number plus the IP address uniquely

identify a server.