User guide

262 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show port configuration
show port [gigabit | mgmt] configuration
Description
Displays the conÞguration of the speciÞed port.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
This example shows the conÞguration of the Gigabit port.
SummitPx1:40 # sh port gig conf
config system-ip 10.6.2.10 / 24
This example shows the conÞguration for of the management port.
SummitPx1:45 # sh port mgmt configuration
config mgmt ipaddress 10.6.2.12 / 24
config mgmt iproute dest-ip 10.10.10.4 gateway 10.6.2.1
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
gigabit Specifies the Gigabit Ethernet network interface port.
mgmt Specifies the front panel 10/100 management port.