User guide

show port details
ExtremeWarePx1 1.2 Command Reference Guide 263
show port details
show port [gigabit | mgmt] details
Description
Displays packet-level counters and current status of the speciÞed port.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
This example shows details about the Gigabit port.
SummitPx1:41 # sh port gig det
Port Details, port 0:
Port State: enabled
Link error counter: 0
Link is UP
Auto negotiation is done
GPCS mode -- Full duplex mode
Auto negotiation is enabled
Full duplex enabled
Linkpartner is 1000 base-T full duplex capable
Linkpartner is NOT 1000 base-T half duplex capable
TX Unicast: 818772
TX Broadcast: 4539
TX Multicast: 0
TX Errors: 0
RX Unicast: 705328
RX Broadcast: 11
RX Multicast: 6754
RX Errors: 0
RX Short: 0
RX Short/CRC: 0
RX Long: 0
RX Long/CRC: 0
gigabit Specifies the Gigabit Ethernet network interface port.
mgmt Specifies the front panel 10/100 management port.