User guide

264 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
This example shows details about the management port.
SummitPx1:46 # sh port mgmt details
Management Port Details:
Link is UP
Auto negotiation is done
Operating in 100 Base-T Full duplex mode
Auto negotiation is enabled
Link error counter: 0
Link partner is 100 base-T full duplex capable
Link partner is 100 base-T half duplex capable
Link partner is 10 base-T full duplex capable
Link partner is 10 base-T half duplex capable
Tx good frames: 12948
Tx MAXCOL errors:‘ 0
Tx LATECOL errors: 0
Tx underrun errors: 0
Tx lost CRS errors: 0
Tx deferred: 0
Tx single collisions: 0
Tx multiple collisions: 0
Tx total collisions: 0
Rx good frames: 12288
Rx CRC errors: 0
Rx allignment errors: 0
Rx resource errors: 0
Rx overrun errors: 0
Rx collision detect errors: 0
Rx short frame errors: 0
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.