User guide

268 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show server configuration
show server
[(index <index number> {- <index number>}) |
(ipaddress <IP address> {- <IP address>} port <port number>)]
configuration
Description
Displays server conÞguration.
Syntax Description
Default
N/A.
Usage Guidelines
Parameter to this command allow you to see conÞgurations for speciÞed servers only.
You can identify a server either by its index number or by its IP address and port number. This
command allows you to specify a number of servers with consecutive index numbers or a number of
servers with consecutive IP addresses, all of which use the same port.
Example
This example displays the conÞguration for the service with index number 3.
SummitPx1:47 # show server index 3 conf
config server index 3 ip 10.6.3.196 port 80
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
index number The unique index number of a server to be displayed.
IP address The IP address of a server to be displayed. The IP address plus the port number uniquely
identify a server.
port number The port number of the servers to be displayed. The port number plus the IP address
uniquely identify a server.