User guide

270 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
10.6.3.198 ICMP URE 2 2 2
5 10.6.3.198 80 HTTP URE 5 10000 2 2 2
10.6.3.199 ICMP URE 2 2 2
6 10.6.3.199 80 HTTP URE 5 10000 2 2 2
10.6.3.200 ICMP URE 2 2 2
7 10.6.3.200 80 HTTP URE 5 10000 2 2 2
10.6.3.201 ICMP URE 2 2 2
8 10.6.3.201 80 HTTP URE 5 10000 2 2 2
This example shows details about the server with index number 3.
SummitPx1:5 # sh server index 3 det
flags: E - check Enabled, D - down, U - Up, R - mac is resolved,
N - mac is not resolved, F - forced down
run - '>' than or '<' than 0, number of consecutive passed or failed respectively
ra - restore after, fa - fail after, left - secs till next check
index IP port proto flg curr-conns max-connections run ra fa
3 10.6.3.196 80 HTTP URE 5 10000 2 2 2
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.