User guide

show server down

ExtremeWarePx1 1.2 Command Reference Guide 271

show server down

Description

Shows which servers are failing health check

Syntax Description

This command has no parameters or options.

Default

N/A.

Usage Guidelines

None.

Example

This example shows which servers are down.

SummitPx1:20 # show server down

Healthcheck is currently enabled

default interval 30 sec, retry interval 10 sec, arp interval 5 min

default fail after 2, restore after 2

2165/2180 ping rx/tx

1 DOWN 124 UP

flags: E - check Enabled, D - check Disabled, R - mac is resolved

ra - restore after, fa - fail after, left - secs till next check

index IP port proto state check left run ra fa ups flg

1.1.1.1 none DOWN IDLE 16 1220RE

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.