User guide

show server-group

ExtremeWarePx1 1.2 Command Reference Guide 273

show server-group

Description

Displays detailed information about all server groups, listing their servers, the current and maximum

connections for each, and up/down status.

Syntax Description

This command has no parameters or options.

Default

N/A.

Usage Guidelines

To see details about a single server group, use the show server-group details command.

Example

This example shows details about all servers.

SummitPx1:25 # show server-group

server-group sg1:

flags: E - check Enabled, D - down, U - Up, R - mac is resolved,

N - mac is not resolved, F - forced down

index IP port proto flg curr-conns max-connections

10.6.2.150 ICMP URE

12 10.6.2.150 80 HTTP URE 0 10000

10.6.3.194 ICMP URE

1 10.6.3.194 80 HTTP URE 0 10000

10.6.3.195 ICMP URE

2 10.6.3.195 80 HTTP URE 0 10000

10.6.3.196 ICMP URE

server-group sg2:

flags: E - check Enabled, D - down, U - Up, R - mac is resolved,

N - mac is not resolved, F - forced down

index IP port proto flg curr-conns max-connections

10.6.1.205 ICMP URE

20 10.6.1.205 80 HTTP URE 0 10000

10.6.1.206 ICMP URE

History

This command was available in ExtremeWarePx 1.1.