User guide

276 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show server-group details
show server-group name <name string> details
Description
Displays detailed information about a server groups, listing its servers, current and maximum
connections, and up/down status.
Syntax Description
Default
N/A.
Usage Guidelines
To see details about all servers, use the show server-group command.
Example
This examples shows details for the server group named sg1.
SummitPx1:27 # sh server-group name sg1 det
flags: E - check Enabled, D - down, U - Up, R - mac is resolved,
N - mac is not resolved, F - forced down
run - '>' than or '<' than 0, number of consecutive passed or failed respectively
ra - restore after, fa - fail after, left - secs till next check
index IP port proto flg curr-conns max-connections run ra fa
10.6.2.150 ICMP URE 2 2 2
12 10.6.2.150 80 HTTP URE 4 10000 2 2 2
10.6.3.194 ICMP URE 2 2 2
1 10.6.3.194 80 HTTP URE 5 10000 2 2 2
10.6.3.195 ICMP URE 2 2 2
2 10.6.3.195 80 HTTP URE 5 10000 2 2 2
10.6.3.196 ICMP URE 2 2 2
3 10.6.3.196 80 HTTP URE 5 10000 2 2 2
10.6.3.197 ICMP URE 2 2 2
4 10.6.3.197 80 HTTP URE 5 10000 2 2 2
10.6.3.198 ICMP URE 2 2 2
5 10.6.3.198 80 HTTP URE 5 10000 2 2 2
10.6.3.199 ICMP URE 2 2 2
6 10.6.3.199 80 HTTP URE 5 10000 2 2 2
10.6.3.200 ICMP URE 2 2 2
7 10.6.3.200 80 HTTP URE 5 10000 2 2 2
History
This command was available in ExtremeWarePx 1.1.
name string The name of the server group for which details should be displayed.