User guide

show service configuration
ExtremeWarePx1 1.2 Command Reference Guide 279
show service configuration
show service
{vip <IP address> {port <port> {protocol [tcp | udp]}}} configuration
Description
Displays conÞguration for services.
Syntax Description
Default
N/A.
Usage Guidelines
Parameters to this command allow you to limit the display to conÞguration for services that use the
speciÞed IP address, the speciÞed IP address and port, or the speciÞed IP address, port, and protocol.
Example
The following command shows the conÞguration for all services.
show service configuration
The following command shows the conÞguration for those services that use the IP address 10.6.2.20.
show service vip 10.6.2.20 configuration
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
IP address VIP for the service of interest
port number Port number for the service of interest
tcp Specifies the TCP protocol.
udp Specifies the UDP protocol.