User guide

show snmp configuration
ExtremeWarePx1 1.2 Command Reference Guide 285
show snmp configuration
show snmp configuration
Description
Displays the current SNMP conÞguration.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
None.
Example
This example shows the current SNMP conÞguration:
station2:125 # sh snmp configuration
#----------------------------------------------------------------
# SNMP configuration
#----------------------------------------------------------------
config snmp sysName "station2"
config snmp add trapreceiver 10.255.172.106 community "public" port 162
enable snmp access
enable snmp traps
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.