User guide

show sticky table
ExtremeWarePx1 1.2 Command Reference Guide 287
show sticky table
show sticky table
{L4 | (L7 {client-ip}) | (client-ip {<IP address>})}
Description
Shows entries in the persistence (stickiness) table.
Syntax Description
Default
N/A.
Usage Guidelines
Parameters to this command allow you to limit the display to particular table entries:
NOTE
This command usually takes 30 to 60 seconds to complete. To interrupt this command, either any of the
keys [q], [Return], or [Esc].
L4 Specifies layer 4 services.
L7 Specifies layer 7 services.
client-ip Specifies client-IP persistence.
IP address A particular client IP address.
Parameters Displays Table Entries
(none) All entries
L4 L4 entries
L7 L7 entries
L7 client-ip L7 entries for client-IP persistence
client-ip Entries for client-IP persistence (both L4 and L7)
client-ip <IP address> Entries for client-IP persistence that match the specified IP address