User guide

show system configuration
ExtremeWarePx1 1.2 Command Reference Guide 291
show system configuration
show system configuration
Description
Shows the current system conÞguration.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
None.
Example
This example shows the system conÞguration.
SummitPx1:25 # sh system conf
config system-ip 64.1.1.10 / 24
config default-gateway 64.1.1.1
disable vlan
config mgmt ipaddress 10.10.10.10 / 24
enable syslog
config syslog ip 10.10.10.20
config nat-mode full
enable clipaging
disable port gigabit
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.