User guide

292 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show system-ip configuration
show system-ip configuration
Description
Displays the IP address of the Gigabit Ethernet interface, along with its net mask.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
None.
Example
The following command shows the IP address of the Gigabit Ethernet interface.
show system-ip configuration
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.