User guide

32 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
configure iparp delete
configure iparp delete <IP address>
Description
Updates a serverÕs entry in the IP Address Resolution Protocol (ARP) table.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
This command:
1 Removes the MAC address of the speciÞed server from the ARP table.
2 Forces an ARP to the server to Þnd the serverÕs current MAC address.
3 Adds a new entry to the table with the serverÕs IP address and the correct MAC address.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command updates the ARP entry for the server with IP address 3.4.5.6:
configure iparp delete 3.4.5.6
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
IP address The IP address of the server.