User guide

configure snmp sysname
ExtremeWarePx1 1.2 Command Reference Guide 45
configure snmp sysname
configure snmp sysname <alphanumeric string>
Description
ConÞgures the system name of the application switch.
Syntax Description
Default
The default system name is the model name of the application switch (for example, SummitPx1).
Usage Guidelines
You must have administrator privileges to issue this command.
You can use this command to change the name of the switch. The system name appears in the prompt for
the command-line interface
.
Changes made by this command are executed immediately and do not require the build command.
Example
The following command names the switch:
configure snmp sysname "Engineering-Lab"
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
alphanumeric string A device name. A maximum of 32 characters is allowed.