User guide

62 ExtremeWarePx1 1.2 Command Reference Guide

Commands for Managing the Switch

disable snmp traps

Description

Prevents SNMP traps from being sent from the switch.

Syntax Description

This command has no parameters or options.

Default

SNMP trap support is enabled by default.

Usage Guidelines

You must have administrator privileges to issue this command.

This command does not clear the SNMP trap receivers that have been conÞgured. The command

prevents SNMP traps from being sent from the switch even if trap receivers are conÞgured.

You must use the build command to commit the conÞguration changes made by this command.

Example

The following command prevents SNMP traps from being sent from the switch to the trap receivers:

disable snmp traps

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.