User guide

disable ssh2
ExtremeWarePx1 1.2 Command Reference Guide 63
disable ssh2
disable ssh2
Description
Disables incoming SSH2 Telnet sessions.
Syntax Description
This command has no parameters or options.
Default
The SSH2 feature is disabled until you obtain a valid security license. If a valid security license is in
effect, SSH2 is enabled with no access proÞle and uses TCP port number 22.
Usage Guidelines
You must have administrator privileges to issue this command.
SSH2 session options (access proÞle and non-default port setting) are not saved when SSH2 is disabled.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command disables the SSH2 feature:
disable ssh2
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.