User guide

enable clipaging

ExtremeWarePx1 1.2 Command Reference Guide 71

enable clipaging

Description

Enables the pause mechanism and does not allow the display to print continuously to the screen.

Syntax Description

This command has no parameters or options.

Default

Command-line interface (CLI) paging is enabled by default.

Usage Guidelines

The command-line interface is designed for use in a VT100 environment. Most show command output

will pause when the display reaches the end of a page.

Even if command-line interface paging is enabled, when you use the show tech-support command to

diagnose system technical problems, the command-line interface paging feature is disabled during

execution of that command.

Example

The following command enables command-line interface paging and does not allow the display to print

continuously to the screen:

enable clipaging

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.