User guide

74 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
enable port gigabit
enable port gigabit
Description
Enables the Gigabit port.
Syntax Description
This command has no parameters or options.
Default
The Gigabit port is disabled by default.
Usage Guidelines
You must have administrator privileges to issue this command.
You will be warned if you attempt to issue the build command when the Gigabit port is disabled.
You must use the build command to commit the conÞguration changes made by this command.
Example
This example enables the Gigabit port, commit changes, and save your conÞguration changes to ßash
memory, so that they are in effect after the next reboot.
SummitPx1:8 # enable port gigabit
SummitPx1:11 # build
SummitPx1:17 # save
Do you want to save to the primary configuration database? (y/n) y
Writing data to Flash...
Saved 16107 bytes to flash.
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.