User guide

76 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
enable snmp access
enable snmp access
Description
Turns on SNMP support for the switch.
Syntax Description
This command has no parameters or options.
Default
SNMP access is enabled by default.
Usage Guidelines
You must have administrator privileges to issue this command.
To have access to the SNMP agent residing in the switch, at least one VLAN must have an IP address
assigned to it.
Any network manager running SNMP can manage the switch, provided the MIB is installed correctly
on the management station. Each network manager provides its own user interface to the management
facilities.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command enables SNMP support for the switch:
enable snmp access
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.