User guide

enable snmp traps
ExtremeWarePx1 1.2 Command Reference Guide 77
enable snmp traps
enable snmp traps
Description
Turns on SNMP trap support.
Syntax Description
This command has no parameters or options.
Default
SNMP trap support is enabled by default.
Usage Guidelines
You must have administrator privileges to issue this command.
An authorized trap receiver can be one or more network management stations on your network. The
switch sends SNMP traps to all trap receivers.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command enables SNMP trap support on the switch:
enable snmp trap
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.