User guide

82 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
enable vlan
enable vlan
Description
Enables VLANs on the application switch.
Syntax Description
This command has no parameters or options.
Default
On SummitPx1, VLANs are disabled by default.
Usage Guidelines
You must have administrator privileges to issue this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
This example enables VLANs on the application switch then conÞgures the IP address, network mask,
and system VLAN.
SummitPx1:1 # enable vlan
* SummitPx1:2 # config system-ip 64.1.1.10 / 24 vlan 100
* SummitPx1:3 # build
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.