User guide

ssh2
ExtremeWarePx1 1.2 Command Reference Guide 97
executed on the remote switch. When you terminate the remote session, commands will then resume
being executed on the original switch.
The remote command option cannot be used with Extreme Networks switches. If you include a remote
command, you will receive an error message.
Example
The following command establishes an SSH2 session on switch engineering1:
ssh2 admin@engineering1
The following command establishes an SSH2 session with the switch summit48i over TCP port 2050
with compression enabled:
ssh2 port 2050 compression on admin@summit48i
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.