User's Manual
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installing the Ethernet Adapter
- Configuring the Ethernet Adapter
- Using Secure Web Server Connection
- Using the Enterasys Networks Wireless Infrastructure Device Manager
- Using the Configuration Management System
- Clearing and Applying System Configuration Settings
- Changing System Properties
- Setting IP Network Properties
- Setting Wireless Network Properties
- Manually Selecting Radio Channels
- Setting Up an Ad-Hoc Network
- Changing Wireless Security Settings
- Changing RADIUS Settings
- Changing SNMP Settings
- Using the Access Control List
- Serial Port
- Resetting the Ethernet Adapter
- Restoring the Ethernet Adapter to Factory Defaults
- Upgrading the System
- Changing the Administration Login Name and Password
- Backing up a Configuration
- Restoring a Configuration
- Logging Out
- Clearing the Ethernet Client List
- Viewing Connection Status
- Viewing System Summary
- Troubleshooting
- Obtaining Support for Your Enterasys Networks Product
- End User License Agreement
- Regulatory Information
Deciding Where to Place the Ethernet Adapter 13
(Canadian Standards Organisation), IEC (International Electrotechnical
Commission) oder von anderen, nationalen oder internationalen
Sicherheitsvorschriften für das entsprechende Land zugelassen wurde.
Alle Verweise auf Netzteile in diesem Dokument beziehen sich auf
Netzgeräte, die diesen Anforderungen entsprechen.
CAUTION: The Enterasys Networks power supply (part number
61-0107-000) input relies on a 16A rated building fuse or circuit
protector for short circuit protection of the line to neutral conductors.
VORSICHT: Der Eingang des Enterasys Networks-Netzteils (Teilenummer
61-0107-000) benötigt zum Schutz vor Kurzschlüssen in den Nullleitern
eine 16-A-Sicherung oder eine Überstromsicherung.
Deciding Where to
Place the Ethernet
Adapter
Place the Ethernet Adapter in a dry, clean location near the hub,
computer, or printer that will be connected to the Ethernet Adapter. The
location must have a power source and be within the following distance
of a Wi-Fi compliant wireless LAN access point or ad-hoc wireless station:
■ For 802.11a compatibility, place the Ethernet Adapter within 50 m
(164 ft) of a Wi-Fi compliant wireless LAN access point.
■ For 802.11b/g compatibility, place the Ethernet Adapter within 100 m
(328 ft) of a Wi-Fi compliant wireless LAN access point.
The location should be away from transformers, heavy-duty motors,
fluorescent lights, microwave ovens, refrigerators, or other equipment
that could cause radio signal interference.
Wall-Mounting the
Ethernet Adapter
The Ethernet Adapter comes with two plastic anchors and two flat head
mounting screws for mounting on a wall.