User's Manual
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installing the Ethernet Adapter
- Configuring the Ethernet Adapter
- Using Secure Web Server Connection
- Using the Enterasys Networks Wireless Infrastructure Device Manager
- Using the Configuration Management System
- Clearing and Applying System Configuration Settings
- Changing System Properties
- Setting IP Network Properties
- Setting Wireless Network Properties
- Manually Selecting Radio Channels
- Setting Up an Ad-Hoc Network
- Changing Wireless Security Settings
- Changing RADIUS Settings
- Changing SNMP Settings
- Using the Access Control List
- Serial Port
- Resetting the Ethernet Adapter
- Restoring the Ethernet Adapter to Factory Defaults
- Upgrading the System
- Changing the Administration Login Name and Password
- Backing up a Configuration
- Restoring a Configuration
- Logging Out
- Clearing the Ethernet Client List
- Viewing Connection Status
- Viewing System Summary
- Troubleshooting
- Obtaining Support for Your Enterasys Networks Product
- End User License Agreement
- Regulatory Information
14 CHAPTER 2: INSTALLING THE ETHERNET ADAPTER
To wall-mount the Ethernet Adapter:
1 1 Place the two plastic anchors into a wall, then place two flat head
mounting screws inside the plastic anchors, as shown in Figure 4
.
Figure 4 Place the screw on the wall
2 Place the Ethernet Adapter onto the wall, as shown in Figure 5.
Figure 5 Place the unit onto the wall
CAUTION: Do not place the Ethernet Adapter on any type of metal
surface. Select a location that is clear of obstructions and provides good
reception.
VORSICHT: Legen Sie den Ethernet-Adapter nicht auf Metallflächen ab.
Wählen Sie einen Ort ohne Störungen und mit gutem Empfang aus.