User's Manual
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installing the Ethernet Adapter
- Configuring the Ethernet Adapter
- Using Secure Web Server Connection
- Using the Enterasys Networks Wireless Infrastructure Device Manager
- Using the Configuration Management System
- Clearing and Applying System Configuration Settings
- Changing System Properties
- Setting IP Network Properties
- Setting Wireless Network Properties
- Manually Selecting Radio Channels
- Setting Up an Ad-Hoc Network
- Changing Wireless Security Settings
- Changing RADIUS Settings
- Changing SNMP Settings
- Using the Access Control List
- Serial Port
- Resetting the Ethernet Adapter
- Restoring the Ethernet Adapter to Factory Defaults
- Upgrading the System
- Changing the Administration Login Name and Password
- Backing up a Configuration
- Restoring a Configuration
- Logging Out
- Clearing the Ethernet Client List
- Viewing Connection Status
- Viewing System Summary
- Troubleshooting
- Obtaining Support for Your Enterasys Networks Product
- End User License Agreement
- Regulatory Information
30 CHAPTER 3: CONFIGURING THE ETHERNET ADAPTER
Clearing and
Applying System
Configuration
Settings
The pages in the Configuration Management System have two buttons:
Clear and Apply.
■ Clear returns the settings to the values they were when you last
clicked Apply.
■ Apply stores the settings permanently in the nonvolatile flash memory.
After you click Apply, the new settings take effect and you can see the
changes on the System Summary page.
CAUTION: Your changes are lost if you forget to click Apply before
moving to a new configuration page.
VORSICHT: Wenn Sie nicht auf "Apply" (Übernehmen) klicken, bevor Sie
zu einer neuen Konfigurationsseite wechseln, gehen Ihre Änderungen
verloren.
Current Channel The channel over which the
Ethernet Adapter is
communicating with clients.
Varies
Security The type of security for which the
Ethernet Adapter is configured.
Open System
(no security)
Rx Data Rate (Mbps) The most recent data reception
rate.
N/A
Tx Data Rate (Mbps) The most recent data transmission
rate.
N/A
Link Quality The normalized transmitted data
rate (that is, the current data rate
over the maximum data rate).
Note: Link Quality is shown in
Infrastructure mode only.
N/A
Received Signal
Strength
The strength of the radio signal
that the Ethernet Adapter detects.
Note: Received Signal Strength is
shown in Infrastructure mode only.
N/A
Activity (Packets Rx) The number of packets the
Ethernet Adapter has received.
N/A
Activity (Packets Tx) The number of packets the
Ethernet Adapter has transmitted.
N/A
IP Address The IP address of the Ethernet
Adapter.
Varies
Table 8 Connection Status Page (continued)