User's Manual
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installing the Ethernet Adapter
- Configuring the Ethernet Adapter
- Using Secure Web Server Connection
- Using the Enterasys Networks Wireless Infrastructure Device Manager
- Using the Configuration Management System
- Clearing and Applying System Configuration Settings
- Changing System Properties
- Setting IP Network Properties
- Setting Wireless Network Properties
- Manually Selecting Radio Channels
- Setting Up an Ad-Hoc Network
- Changing Wireless Security Settings
- Changing RADIUS Settings
- Changing SNMP Settings
- Using the Access Control List
- Serial Port
- Resetting the Ethernet Adapter
- Restoring the Ethernet Adapter to Factory Defaults
- Upgrading the System
- Changing the Administration Login Name and Password
- Backing up a Configuration
- Restoring a Configuration
- Logging Out
- Clearing the Ethernet Client List
- Viewing Connection Status
- Viewing System Summary
- Troubleshooting
- Obtaining Support for Your Enterasys Networks Product
- End User License Agreement
- Regulatory Information
Using the Configuration Management System 41
CAUTION: With the Allow option of the System Default Mode selected,
the Ethernet Adapter allows all Ethernet frames except those carrying the
MAC addresses that are specified in the Access Control List and have the
permission type Deny. Similarly, with the Deny option of the System
Default Mode selected, the Ethernet Adapter denies all Ethernet frames
except those carrying the MAC addresses that are specified in the Access
Control List and have the permission type Allow.
Make sure that the MAC address of the computer through which you are
configuring the Ethernet Adapter is not specified in the Access Control
List with the permission type Deny if you want to set the access control
type to Allow. If you want to set the Access Control Type to Deny, make
sure that the MAC address of the computer is included in the Access
Control List with the permission type Allow. Failure to do so results in
access to the Ethernet Adapter being blocked; the Ethernet Adapter will
no longer be configurable through the computer.
VORSICHT: Wenn im System Default Mode (Standardsystemmodus) die
Option "Allow" (Zulassen) aktiviert ist, werden im Ethernet-Adapter alle
Ethernet-Frames außer denen zugelassen, die in der
Zugriffssteuerungsliste angegebene MAC-Adressen enthalten und den
Berechtigungstyp "Deny" (Blockieren) besitzen. Wenn im System Default
Mode (Standardsystemmodus) die Option "Deny" (Blockieren) aktiviert
ist, werden im Ethernet-Adapter dementsprechend alle Ethernet-Frames
außer denen gesperrt, die in der Zugriffssteuerungsliste angegebene
MAC-Adressen enthalten und den Berechtigungstyp "Allow" (Zulassen)
besitzen.
Die MAC-Adresse des Computers, über den der Ethernet-Adapter
konfiguriert wird, darf daher in der Zugriffssteuerungsliste nicht den
Berechtigungstyp "Deny" (Blockieren) besitzen, wenn Sie den
Zugriffssteuerungstyp auf "Allow" (Zulassen) festlegen möchten. Soll der
Zugriffssteuerungstyp auf Deny (Blockieren) festgelegt werden, muss die
MAC-Adresse des Computers in der Zugriffssteuerungsliste enthalten sein
und den Berechtigungstyp "Allow" (Zulassen) aufweisen. Andernfalls
wird der Zugang zum Ethernet-Adapter blockiert, der dann nicht mehr
über den Computer konfiguriert werden kann.
6 Click Apply.
To delete one or more than one client(s) from the Access Control List,
select the client(s) and then click Delete.