Technical Specs
Table Of Contents
- ExtremeSwitching SLX 9030 Technical Specifications
- Preface
- ExtremeSwitching SLX 9030 Technical Specifications
- SLX 9030 Switch Specifications
- Power and Heat Dissipation
- Power Supply Specifications
- Acoustics Specifications
- SLX 9030 Software Specifications
- Ethernet
- LEDs
- Other
- Weight and physical dimensions
- Data port specifications (Ethernet)
- Serial port specifications (pinout RJ-45)
- Serial port specifications (pinout - mini-USB)
- Serial port specifications (protocol)
- Memory specifications
- Regulatory compliance (EMC)
- Regulatory compliance (safety)
- Regulatory compliance (environmental)
SLX 9030 Software Specications
Software Specications Description
Connector Options
• 10/1 GbE SFP+
• 40GbE QSFP+
• 100GbE QSFP-28
• Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45
• Console management:RJ45 serial port and USB type-C port with serial
communication device class support
• Storage: USB port, standard-A plug
Maximum MAC addresses Up to 80,000
Maximum VLANS 4,096
Maximum ACLs 2048
Maximum members in a standard LAG 32
Maximum per-port priority pause level 8
Maximum switches an mLAG can span 2
Maximum IPv4 unicast routes 128,000
Maximum IPv6 unicast routes 15,000
Maximum jumbo frame size 9,126 bytes
QoS priority queues (per port) 8
Ethernet
System component Description Maximum ports
supported
QSFP-28 ports The QSFP-28 ports can support 10Gb/25Gb/40Gb/100Gb 4
SFP+ ports The SFP+ ports can support 1Gb/10Gb interfaces (SLX 9030-48S). User
port numbering is from left to right and top to bottom.
48
10GBASE-T ports RJ-45 port with 1Gb/10Gb speeds (SLX-9030-48T) User port numbering is
from left to right and top to bottom.
48
Ethernet management port RJ-45 port with 10Mb/100Mb/1Gb speeds 1
LEDs
System component Description
Interface module LEDs
• Power: Green - Power OK, o - No power
• Status: Green- Status OK, Amber - Error; O - Unexpected error
• Link status (1 LED per physical port): Green (Solid) - Link is up; Green (Blinking) - Link is up and
running trac; O - No link
Power supply LEDs
• LED 1 and LED 2: Steady Green - Input and output voltages are within range
• LED 1: O and LED 2: Flashing Yellow - Power supply does not have incoming power and is not
providing power to the device, or the Input AC voltage is out of range.
• LED 1: Green and LED 2: Yellow - Output voltage is out of range
LEDs
ExtremeSwitching SLX 9030 Technical Specications
9035815-00 Rev AA 11