Technical Specs

System component Description
• LED 1: Green and LED 2: Flashing Yellow/Green - Over-temperature warning or fan error
Fan module LEDs
• Power (Fan) LED: No light (LED is o) - Fan assembly does not have power. Steady green - Fan
assembly has power.
• Status (Fan) LED: No light (LED is o) - Fan assembly is either healthy or does not have power. Steady
amber - Fan assembly is being initialized or has a failure (full or partial).
Other
System component Description
Serial Cable RJ-45 console cable
RJ-45 to DB9 adapter 1 (RJ-45 port to female DB9 connector)
AC power cord, power clip For both units
Weight and physical dimensions
The SLX 9030/9030-T Switch is 1 RU and 19.2" in depth.
Model Dimensions (with Fan FRU) Weight (with 6 x Fan FRUs and 2 x PSUs
without optics)
SLX 9030/9030-T Switch 445 x 43.7 x 451.5 mm 8.96 Kg (19.712 lbs)
Fan tray 42.0 x 41.2 x 94.6 mm 0.18 Kg (.396 lb.)
Power Supply Unit 54.4 x 40.0 x 236.6 mm 0.76 Kg (1.672 lbs)
Data port specications (Ethernet)
System component Description Maximum ports
supported
QSFP28 ports 100 GbE QSFP28 ports 6
SFP+ ports The SFP+ ports can support 10GbE/1GbE interfaces. There are 48 x SFP+ ports. 48
Ethernet management port RJ-45 port with 10/100/1000 Mbps auto-negotiating capability 1
Serial port specications (pinout RJ-45)
Pin Signal Description
1 Not supported N/A
2 Not supported N/A
3 RXD Receive data
4 GND Logic ground
5 Not supported N/A
Other
ExtremeSwitching SLX 9030 Technical Specications
12 9035815-00 Rev AA