Installation Guide
Table Of Contents
- Table of Contents
- Preface
- ExtremeSwitching 5520 Series Overview
- Port Partitioning
- Power Supplies for Use with Your Switch
- Expansion Modules
- Site Preparation
- Building Stacks
- Installing Your Switch
- Activating and Verifying the Switch
- Installing Expansion Modules
- Installing a V300 Virtual Port Extender
- Install a V300 Virtual Port Extender on a Wall
- Install a V300 Virtual Port Extender Under or on a Table Surface
- Install a V300 Virtual Port Extender in a VESA Mount
- Install a V300 in a Single Rack Mount
- Install a V300 in a Dual Rack Mount
- Install a V300 in a DIN Rail Mount
- Install a V300-8P-2T-W Model in a Single or Dual Rack Mount
- Installing a V300-8P-2T-W Model in a DIN Rail Mount
- Connecting the V300 Virtual Port Extender to Power
- Installing a V400 Virtual Port Extender
- Installing a Half-Duplex to Full-Duplex Converter
- Install a Versatile Interface Module in a 5520 Series Switch
- Installing a V300 Virtual Port Extender
- Replacing AC Power Supplies
- Replacing Fan Modules
- Monitoring the Device
- Technical Specifications
- ExtremeSwitching 5520 Series Technical Specifications
- V300 Virtual Port Extender Specifications
- V400 Virtual Port Extender Technical Specifications
- Half-Duplex to Full-Duplex Converter Technical Specifications
- 350 W AC Power Supplies Technical Specifications
- 715 W AC Power Supplies Technical Specifications
- 1100 W AC Power Supplies Technical Specifications
- 2000 W AC Power Supply Technical Specifications
- Power Cord Requirements for AC-Powered Switches and AC Power Supplies
- Console Connector Pinouts
- Safety and Regulatory Information
- Considerations Before Installing
- General Safety Precautions
- Maintenance Safety
- Fiber Optic Ports and Optical Safety
- Cable Routing for LAN Systems
- Installing Power Supply Units and Connecting Power
- Selecting Power Supply Cords
- Battery Notice
- Battery Warning - Taiwan
- EMC Warnings
- Japan (VCCI Class A)
- Korea EMC Statement
- Glossary
- Index
There is one Micro-B USB console port on the front panel. If the Micro-B USB console port is connected,
it will be selected over the RJ45 console port. The Micro-B USB console port will disconnect when the
switch is rebooted. You can re-connect the port if needed. When the Micro-B USB console is active, any
messages from the switch to the client terminal will be echoed to both the USB console and the rear
panel RJ45 serial port; however, no user input will be accepted from the rear panel port.
Tip
Using a Micro-USB Type B to USB Type A cable, connect the Micro-USB Type B end to the
switch, and the USB Type A end to a laptop or PC and complete the driver installation steps.
There are also two USB 2.0 Type A ports: one on the front panel labeled USB 1 and one on the rear
labeled USB 2. They can be used for a bluetooth dongle or for attaching a removable memory module.
Note
The first USB storage device inserted will be mounted and can be used under EXOS as /usr/
local/ext. A second inserted USB storage device will not be used until the first one is
removed.
Cooling
Each base model is available with front-to-back cooling.
Switch cooling is provided by replaceable fan modules. The available fan module uses airflow from front
to back. Two modular power supply slots accommodate AC power supplies. Power supplies have
integrated cooling fans that operate independently of the switch fan.
A spare fan module (17115) with front-to-back airflow is available for 5520 Series switches.
Power Supplies
Two power supply bays accommodate AC power supplies. Power supplies have integrated cooling fans
that operate independently of the switch fans. Like the fan modules, the power supplies are available in
models with front-to-back cooling airflow. For more information about the power supplies used in the
5520 Series switches, see Power Supplies for Use with Your Switch on page 22.
Power supplies are ordered separately.
Versatile Interface Module Options
The following Versatile Interface Module (VIM) are available for 5520 Series switches:
• 5520-VIM-4X versatile interface module that provides four 10-GbE (SFP+) ports.
• 5520-VIM-4XE versatile interface module that provides four 10-GbE (SFP+) ports, LRM/MACsec
capable.
• 5520-VIM-4YE versatile interface module that provides four 25-GbE (SFP28) MACsec capable ports.
Warning
The switch must be powered o before you install any VIM options. The interface module
options are not hot swappable.
Cooling ExtremeSwitching 5520 Series Overview
12 ExtremeSwitching 5520 Series Hardware Installation Guide