Installation Guide
Table Of Contents
- Table of Contents
- Preface
- ExtremeSwitching 5520 Series Overview
- Port Partitioning
- Power Supplies for Use with Your Switch
- Expansion Modules
- Site Preparation
- Building Stacks
- Installing Your Switch
- Activating and Verifying the Switch
- Installing Expansion Modules
- Installing a V300 Virtual Port Extender
- Install a V300 Virtual Port Extender on a Wall
- Install a V300 Virtual Port Extender Under or on a Table Surface
- Install a V300 Virtual Port Extender in a VESA Mount
- Install a V300 in a Single Rack Mount
- Install a V300 in a Dual Rack Mount
- Install a V300 in a DIN Rail Mount
- Install a V300-8P-2T-W Model in a Single or Dual Rack Mount
- Installing a V300-8P-2T-W Model in a DIN Rail Mount
- Connecting the V300 Virtual Port Extender to Power
- Installing a V400 Virtual Port Extender
- Installing a Half-Duplex to Full-Duplex Converter
- Install a Versatile Interface Module in a 5520 Series Switch
- Installing a V300 Virtual Port Extender
- Replacing AC Power Supplies
- Replacing Fan Modules
- Monitoring the Device
- Technical Specifications
- ExtremeSwitching 5520 Series Technical Specifications
- V300 Virtual Port Extender Specifications
- V400 Virtual Port Extender Technical Specifications
- Half-Duplex to Full-Duplex Converter Technical Specifications
- 350 W AC Power Supplies Technical Specifications
- 715 W AC Power Supplies Technical Specifications
- 1100 W AC Power Supplies Technical Specifications
- 2000 W AC Power Supply Technical Specifications
- Power Cord Requirements for AC-Powered Switches and AC Power Supplies
- Console Connector Pinouts
- Safety and Regulatory Information
- Considerations Before Installing
- General Safety Precautions
- Maintenance Safety
- Fiber Optic Ports and Optical Safety
- Cable Routing for LAN Systems
- Installing Power Supply Units and Connecting Power
- Selecting Power Supply Cords
- Battery Notice
- Battery Warning - Taiwan
- EMC Warnings
- Japan (VCCI Class A)
- Korea EMC Statement
- Glossary
- Index
Mean Time Between Failures (MTBF)
Table 45: 5520 MTBF
Ambient
Temp =
25°C
5520-24T 5520-24W 5520-24X 5520-12M
W-36W
5520-48T 5520-48W 5520-48SE
System
base
(all boards,
modules
excluded)
545,928 480,404 633,004 392,662 506,767 417,304 531,218
Complete system - A
(system base+full fans+1 PSU)
One
2000W
PSU
185,080 174,532 179,138
One 1100W
PSU
212,906 199,067 205,081
One 715W
PSU
218,879 204,272 210,617
One 350W
PSU
270,711 193,198 236,070 169,687
Complete system - B
(system base+ full fans+2 PSUs)
Two
2000W
PSU
123,936 119,115 121,243
Two 1100W
PSU
150,232 143,607 146,293
Two 715W
PSU
156,248 148,663 151,992
Two 350W
PSU
184,380 193,198 167,627 169,687
Note
5520-24X and 5520-24T models have 2 fan slots; All other models have 3.
CPU and Memory
Table 46: CPU, Memory
CPU/Memory
1-core, 1.7GHz x86 ARM CPU (Cortex A72)
2 GB DDR4 ECC memory
Mean Time Between Failures (MTBF) Technical Specifications
130 ExtremeSwitching 5520 Series Hardware Installation Guide