Installation Guide
Table Of Contents
- Table of Contents
- Preface
- ExtremeSwitching 5520 Series Overview
- Port Partitioning
- Power Supplies for Use with Your Switch
- Expansion Modules
- Site Preparation
- Building Stacks
- Installing Your Switch
- Activating and Verifying the Switch
- Installing Expansion Modules
- Installing a V300 Virtual Port Extender
- Install a V300 Virtual Port Extender on a Wall
- Install a V300 Virtual Port Extender Under or on a Table Surface
- Install a V300 Virtual Port Extender in a VESA Mount
- Install a V300 in a Single Rack Mount
- Install a V300 in a Dual Rack Mount
- Install a V300 in a DIN Rail Mount
- Install a V300-8P-2T-W Model in a Single or Dual Rack Mount
- Installing a V300-8P-2T-W Model in a DIN Rail Mount
- Connecting the V300 Virtual Port Extender to Power
- Installing a V400 Virtual Port Extender
- Installing a Half-Duplex to Full-Duplex Converter
- Install a Versatile Interface Module in a 5520 Series Switch
- Installing a V300 Virtual Port Extender
- Replacing AC Power Supplies
- Replacing Fan Modules
- Monitoring the Device
- Technical Specifications
- ExtremeSwitching 5520 Series Technical Specifications
- V300 Virtual Port Extender Specifications
- V400 Virtual Port Extender Technical Specifications
- Half-Duplex to Full-Duplex Converter Technical Specifications
- 350 W AC Power Supplies Technical Specifications
- 715 W AC Power Supplies Technical Specifications
- 1100 W AC Power Supplies Technical Specifications
- 2000 W AC Power Supply Technical Specifications
- Power Cord Requirements for AC-Powered Switches and AC Power Supplies
- Console Connector Pinouts
- Safety and Regulatory Information
- Considerations Before Installing
- General Safety Precautions
- Maintenance Safety
- Fiber Optic Ports and Optical Safety
- Cable Routing for LAN Systems
- Installing Power Supply Units and Connecting Power
- Selecting Power Supply Cords
- Battery Notice
- Battery Warning - Taiwan
- EMC Warnings
- Japan (VCCI Class A)
- Korea EMC Statement
- Glossary
- Index
Table 65: Power Specifications
Minimum
3
Heat
Dissipation
(BTU/hr)
Minimum
3
Power
Consumption
(Watts)
Maximum
3
Heat
Dissipation
(BTU/hr)
Maximum
3
Power
Consumption
(Watts)
V400-24t-10GE2 36.1 10.6 75.2 22.1
V400-24p-10GE2 109.8 32.2 336.8 478.7
V400-48t-10GE4 66.0 19.3 134.8 39.5
V400-48p-10GE4 168.9 49.5 583.2 910.9
VX-RPS-1000 141.3 41.4 3152.8 924
Fan and Acoustic Sound
Table 66: Fan and Acoustic Sound
Bystander Sound Pressure
4
in dB(A)
Declared Sound Power
(L
WAd
)
4
in bels
V400-24t-10GE2 41.6 (Duty 30%) /
59.4 (max.)
4.4 (Duty 30%) /
6.2 (max.)
V400-24p-10GE2 47.5 (Duty 30%) /
64.0 (max.)
5.0 (Duty 30%) /
6.7 (max.)
V400-48t-10GE4 43.4 (Duty 30%) /
61.1 (max.)
4.6 (Duty 30%) /
6.4 (max.)
V400-48p-10GE4 48.5 (Duty 30%) /
65.5 (max.)
5.1 (Duty 30%) /
6.8 (max.)
3
Minimum is defined as idle, with no ports linked. Maximum is defined as fans high, all ports 100% trac.
4
At 25°C and 50% PoE load where applicable
Fan and Acoustic Sound Technical Specifications
138 ExtremeSwitching 5520 Series Hardware Installation Guide