Installation Guide
Table Of Contents
- Table of Contents
- Preface
- ExtremeSwitching 5520 Series Overview
- Port Partitioning
- Power Supplies for Use with Your Switch
- Expansion Modules
- Site Preparation
- Building Stacks
- Installing Your Switch
- Activating and Verifying the Switch
- Installing Expansion Modules
- Installing a V300 Virtual Port Extender
- Install a V300 Virtual Port Extender on a Wall
- Install a V300 Virtual Port Extender Under or on a Table Surface
- Install a V300 Virtual Port Extender in a VESA Mount
- Install a V300 in a Single Rack Mount
- Install a V300 in a Dual Rack Mount
- Install a V300 in a DIN Rail Mount
- Install a V300-8P-2T-W Model in a Single or Dual Rack Mount
- Installing a V300-8P-2T-W Model in a DIN Rail Mount
- Connecting the V300 Virtual Port Extender to Power
- Installing a V400 Virtual Port Extender
- Installing a Half-Duplex to Full-Duplex Converter
- Install a Versatile Interface Module in a 5520 Series Switch
- Installing a V300 Virtual Port Extender
- Replacing AC Power Supplies
- Replacing Fan Modules
- Monitoring the Device
- Technical Specifications
- ExtremeSwitching 5520 Series Technical Specifications
- V300 Virtual Port Extender Specifications
- V400 Virtual Port Extender Technical Specifications
- Half-Duplex to Full-Duplex Converter Technical Specifications
- 350 W AC Power Supplies Technical Specifications
- 715 W AC Power Supplies Technical Specifications
- 1100 W AC Power Supplies Technical Specifications
- 2000 W AC Power Supply Technical Specifications
- Power Cord Requirements for AC-Powered Switches and AC Power Supplies
- Console Connector Pinouts
- Safety and Regulatory Information
- Considerations Before Installing
- General Safety Precautions
- Maintenance Safety
- Fiber Optic Ports and Optical Safety
- Cable Routing for LAN Systems
- Installing Power Supply Units and Connecting Power
- Selecting Power Supply Cords
- Battery Notice
- Battery Warning - Taiwan
- EMC Warnings
- Japan (VCCI Class A)
- Korea EMC Statement
- Glossary
- Index
Figure 28: 5520-VIM-4X Versatile Interface Module
Table 12: Port Numbers for Ports on the 5520-VIM-4X Module
5520 Series 24-port models 5520 Series 48-port models VOSS (all models)
33-36 (EXOS) 57-60 on 48-port models (EXOS) VIM slot number=2
Interface names=2/1-2/4
5520-VIM-4XE Versatile Interface Module
The 5520-VIM-4XE versatile interface module provides four 10-GbE (SFP+) ports, MACsec capable.
For information about the supported optical modules, refer to the most recent version of the Extreme
Optics website.
Figure 29: 5520-VIM-4XE Versatile Interface Module
Table 13: Port Numbers for Ports on the 5520-VIM-4XE Module
5520 Series 24-port models 5520 Series 48-port models VOSS (all models)
33-36 (EXOS) 57-60 on 48-port models (EXOS) VIM slot number=2
Interface names=2/1-2/4
5520-VIM-4XE Versatile Interface Module Expansion Modules
34 ExtremeSwitching 5520 Series Hardware Installation Guide