Design Reference

Hardware Description Part number
1000BASE-ZX CWDM
(LC)
1470 nm to 1610 nm
Range up to 70 km
AA1419061-E6 to
AA1419068-E6
1000BASE-BX10 DDI
SFP
1310 nm, single fiber LC
Range up to 10 km
AA1419069-E6
1000BASE-BX10 DDI
SFP
1490 nm, single fiber LC
Range up to 10 km
AA1419070-E6
1000BASE-EX DDI SFP 1550 nm
Range up to 120 km
AA1419071-E6
1000BASE-BX40
bidirectional SFP
1310 nm, single fiber LC
Range up to 40 km
AA1419076–E6
1000BASE-BX40
bidirectional SFP
1490 nm, single fiber LC
Range up to 40 km
AA1419077–E6
100BASE-FX SFP 1310 nm, LC connector AA1419074-E6
Small form factor (SFP+) pluggable plus transceivers
SFP+ transceivers are hot-swappable input and output enhancement components that allow
10 gigabit connections. All Avaya SFP+ transceivers use Lucent connectors (LC) to provide
precision keying and low interface losses.
The following table lists and describes the Avaya SFP+ models.
Table 6: Compatible SFP+s
Hardware
Description Part number
10GBASE-LR/LW SFP+ 1310 nm SMF
Range up to 10 km
AA1403011-E6
10GBASE-ER/EW SFP+ 1550 nm SMF
Range up to 40 km
AA1403013-E6
10GBASE-SR/SW SFP+ 850 nm
Range up to 300 m
AA1403015-E6
10GBASE ZR/ZW SFP+ 1550 nm 70km SMF AA1403016-E6
10GBASE-ER CWDM SFP
+
1470 to 1610 nm with a range up to 40
km
AA1403153-E6 to
AA1403160-E6
10GBASE-LRM SFP+ 220 m, 1260 to 1355 nm; 1310 nm
nominal MMF
AA1403017-E6
10GBase-CX 4-pair twinaxial copper cable that plugs
into the SFP+ socket and connects two
10 Gb ports. The supported lengths
are 3 m, 5 m, and 10 m.
AA1403018-E6 to
AA1403020-E6
Optical power considerations
When you connect the device to collocated equipment, ensure that enough optical attenuation
exists to avoid overloading the receivers of each device. You must consider the minimum
Hardware fundamentals and guidelines
26 Network Design Reference for Avaya VSP 4000 February 2014
Comments? [e-mail]