Specifications

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesHigh-performance 10/40 Gigabit Ethernet Switch

WWW.EXTREMENETWORKS.COM

ExtremeSwitching

™

VSP 7200 Series

The Extreme Virtual Services Platform 7200 Series are space-ecient, high-

performance Ethernet switches, delivering wire-speed 10 and 40 Gigabit

Ethernet connectivity.

They are ideally suited to deliver high-speed Ethernet connectivity in a

Top-of-Rack (ToR) role. Additionally, they provide a cost-eective 10 Gigabit

Ethernet fan-out capability for existing Core Switch deployments, saving

valuable ports and slots. Featuring dual, hot-swappable AC or DC power

supplies and fans, the VSP 7200 is an important addition to a network

manager’s toolkit for creating always-on high-performance solutions.

The VSP 7200 series comes in 2 variants:

• 7254XTQ with 48 x 10BASE-T copper ports, plus 6 x 40 Gigabit

QSFP+ ports

• 7254XTQ port-licensed model with 24 x 10GBASE-T ports and

4 x 40GB QSFP+ ports initially enabled for operation

VSP 7200 port-licensed models have the same physical conﬁguration as non-

port licensed models and can later be upgraded to the full port capacity of the

unit – oering a ﬂexible pay as you grow option for your deployment.

The VSP 7200 also oers both front-to-back and back-to-front airﬂow

options providing ﬂexibility to conform to a variety of hot-aisle/cold-aisle

design requirements.

Data Sheet

Highlights

• High-performance 10/40 Gigabit

Ethernet Switch

• 48 ports of 10 Gigabit

Ethernet connectivity

• 6 ports of 40 Gigabit Ethernet for

ﬂexible Uplink or Distributed Top-of-

Rack connectivity

• Non-blocking, wire-speed

switching architecture

• Integrated design that is optimized

for low latency

• Ecient compact form-factor that

reduces power and footprint consumption

• Supports both conventional

Routed IP and/or Fabric-based

networking deployments

Summary of content (9 pages)

PAGE 1
Data Sheet Highlights • High-performance 10/40 Gigabit Ethernet Switch • 48 ports of 10 Gigabit Ethernet connectivity • 6 ports of 40 Gigabit Ethernet for flexible Uplink or Distributed Top-ofRack connectivity • Non-blocking, wire-speed switching architecture • Integrated design that is optimized for low latency • Efficient compact form-factor that reduces power and footprint consumption • Supports both conventional Routed IP and/or Fabric-based networking deployments ExtremeSwitching™ VSP 7200 Series The
PAGE 2
Extreme Distributed Top-of-Rack: Creating the LatencyReduced Network Extreme Fabric Connect: Replacing Complexity with Capability The VSP 7200 is an integral component of our Fabric Connect strategy for end-to-end Shortest Path Bridgingbased virtualized network. We are able to leverage the Fabric Connect technology to flexibly mesh multiple VSP 7200s to deliver multi-hop, low-latency for deployment scenarios that call for massive scale-out.
PAGE 3
Extreme Fabric Extend: Taking Benefits to a Broader Audience With Extreme’s Fabric Extend technology, businesses can fully integrate remote locations with the Fabric Connect cloud. Fabric Extend enables Fabric Connect connectivity across IP-based topologies such as MPLS and Optical Ethernet. Fabric Extend is a versatile technology that can deliver VLAN and VRF extension, Layer 2 and Layer 3 Huband-Spoke networking, and site interconnect for dispersed Campus and Data Center locations.
PAGE 4
Summary The Extreme Virtual Services Platform 7200 Series is purpose-built to support the dynamic Data Center and high-density 10 Gigabit Ethernet Top-of-Rack deployments of today. It helps alleviates infrastructure complexity and can reduce power consumption with a truly scalable and strategic architecture; it is designed to be the highperformance Top-of-Rack platform for the future.
PAGE 5
Gigabit and up to 3,076 ports of 40 Gigabit, and a virtual backbone of up to 122.88Tbps capacity. • Switch Fabric Architecture: 2.56Tbps Full-Duplex • Frame forwarding rate: 1,428Mpps per Switch • Extreme Networks Fabric Connect technology supports L2 Virtual Service Networks (VSNs), Layer 3 Virtual Service Networks, Inter-VSN Routing, IP Shortcut Routing, IP Multicast-over-Fabric Connect, Fabric Attached Server, Fabric Extend, Switched UNI, and Zero-Touch Fabric Connect.
PAGE 6
• ECMP Groups: 1,000 • ECMP Paths per Group: 8 Operations and Management • VRRP Interfaces: up to 252 • Mirrored Ports: 53, and up to 71 when all 40 Gigabit ports are Channelized • RSMLT Interfaces: up to 252 • sFlow: up to 3,000 samples per second • VRF Instances: up to 256 • Fabric RSPAN: up to 1,000 VSN IDs per Region Multicast Supported Transceivers • IGMP Interfaces: 4,059 For a list of the transceivers supported on the 7200 Series hardware, refer to our Extreme Optics Compatibility Tool at
PAGE 7
• 1112 Host Extensions for IP Multicasting • 1122 Requirements for Internet Hosts - Communication Layers • 1155 Structure and Identification of Management Information for TCP/ IP-based Internets • 1156 MIB for Network Management of TCP/IP • 1157 SNMP • 1212 Concise MIB Definitions • 1213 MIB for Network Management of TCP/ IP-based Internets: MIB-II • 1215 Convention for Defining Traps for use with the SNMP Standards Compliance (cont.) IETF (cont.
PAGE 8
• 4193 Unique Local IPv6 Unicast Addresses • 4213 Basic Transition Mechanisms for IPv6 Hosts and Routers • 4250 SSH Assigned Numbers • 4251 SSH Protocol Architecture • 4252 SSH Authentication Protocol • 4253 SSH Transport Layer Protocol • 4254 SSH Connection Protocol • 4255 DNS to Securely Publish SSH Key Fingerprints • 4256 Generic Message Exchange Authentication for SSH • 4291 IPv6 Addressing Architecture • 4292 IP Forwarding Table MIB • 4293 IP MIB • 4301 Security Architecture for IP6 • 4302 IP Authentic
PAGE 9
Ordering Information Part Code Description EC7200A2F-E6 VSP 7254XTQ 54-port Ethernet Switch, supporting 48 x 10GBASE-T & 6 x 40GBASE-QSFP+ ports. Includes single 800W AC Power Supply, Front-to-Back Airflow Fans, and Base Software License. Slide Rack Mount Kit sold separately. EC7200A2B-E6 VSP 7254XTQ 54-port Ethernet Switch, supporting 48 x 10GBASE-T & 6 x 40GBASE-QSFP+ ports. Includes single 800W AC Power Supply, Back-to-Front Airflow Fans, and Base Software License.