Specifications

10-10 Extreme Networks Consolidated Hardware Guide
Alpine 3800 Series I/O Modules
FM-24SFi Module
Figure 10-7 shows the FM-24SFi module.
Figure 10-7: FM-24SFi module
The FM-24SFi module has 24 100 Mbps Ethernet ports, using standard MT-RJ
connectors. The FM-24SFi module supports 100BASE-FX in single mode only.
The default configuration of the FM-24SFi module is as follows:
• All ports are added to the default VLAN as untagged.
• All ports inherit the properties of the default VLAN (protocol type, VLANid, and so
forth).
• All ports operate in 100 Mbps, single mode. Half-duplex mode is not supported.
Software Requirements
The FM-24SFi module requires that you load ExtremeWare version 6.1.7 or later and
BootROM 6.5 or later on your switch.
Note: See “I/O Module LEDs,” on page 10-18 for information on LED activity.
FM-24SFi
Module status LED
242322212019181716151413121110987654321
100 Mbps ports
with status LEDs