Instructions / Assembly

Step 10: Install Power Tool Rack
a. The Power Tool Rack requires an
adapter to hang on the edge of the shelf.
(Adapter does not need to be used if
hanging the Power Tool Rack on the top
rail of a tool cart or roller cabinet.)
b. Attach the adapter to the shelf by
inserting the top hooked portion of the
adapter into the slots on the edge of the
shelf as shown in Diagrams 1 & 2.
c. After the adapter is in place on
the edge of the shelf, use the screw
supplied with the adapter to secure it to
the underside of the shelf.
d. Hang the Power Tool Rack using the
slots on the back side of the adapter.
e. Power Tool Rack is ready to use.
Diagram 1
Diagram 2
Diagram 3
Secure adapter by
installing screw
Diagram 4
Diagram 5
Slots on
edge of
shelf
BONUS POWER TOOL RACK ACCESSORY
INSTALLATION