Manualshelf

Instructions / Assembly

ManualsBrandsExtreme Tools ManualsTool ChestsDX 72 in. 0-Drawer Extreme Power Workstation Hutch in Green with Black Handle
12345678910
STEP 4 - Install Back Panel
a. Pull the laminated top/stainless steel top forward about 1/8” from the rear fence rail.
b. With the assistance of another adult, set the bottom edge of the Back Panel between the rear fence
rail and the back edge of the laminated top/stainless steel top.
c. Align the Back Panel’s holes with the threaded inserts of the side panel assembly. Secure in place
using (5) M6 Phillips head screws. Tighten all screws.
Secure Back Panel to
Side Panel using
M6 Phillips Head
Screws